In case you are stuck with the Netgear Orbi router setup issues, then worry not. We are saying this because, in this article, we have shed light on the topmost reasons why you are facing them along with the troubleshooting techniques through which you can resolve them. For your information, you better bookmark this post. The reason being, some of the hacks outlined below can also be used if you ever come across the Orbi pink light issue.
Avoid panicking if you fail to understand any hack while reading this post. Remind yourself that you can do this, and re-read the technique that you were previously reading.
What Led You to Netgear Orbi Setup Issues?
Well, there can be various reasons why you are experiencing the Orbi router setup issues. Some of them include improper power supply, damaged hardware, weak cable connection, too much distance between networking devices, incorrect placement, wrong web address, incorrect login credentials, signal interference, and much more.
Regardless of the reasons why you are having a hard time because of the Orbi router setup issues, troubleshooting them is possible if you walk through the next section.
How to Fix Netgear Orbi Router Setup Issues?
1. Check the Power Supply
Before you do anything else, it is recommended that you check the power supply that is being supplied to your networking device. Is it proper? Yes or no? In case the answer is no, then you should consider plugging your networking device into another wall socket and if the answer is yes, then maybe some other reason has caused the Orbi router setup issues. To troubleshoot them, you may continue reading.
2. Relocate the Netgear Router
Make sure that the Netgear Orbi router as well as the satellite is placed in the center-most location of your house. This will ensure an optimal coverage. Apart from this, see to it that the Orbi router is kept in the same room where the existing modem is kept. Now, check again if you are experiencing the Orbi router setup issues. In case you are, then you already know what to do, i.e. to implement the following technique.
3. Use the Right Web Address
Is the web address that you have entered correct? Does it have any typing errors? In case, it does, then you need to enter it again into the address bar or the URL field of your internet browser. Apart from this, ensure that there are no typing errors in it. At last, the web address should be cross-checked once before you press the Enter key located on your keyboard to proceed further with the setup process.
4. Replace the Ethernet Cable
As we mentioned earlier, some of the hacks given in this post can help you resolve the Netgear Orbi purple light or pink light issue. This is one of those hacks. Ensure that the Ethernet cable in use is damage-free at all costs. Apart from this, the connection which has been established via it is finger-tight. Leaving the connection loose will only force you to invite more technical issues to the table. You do not want that, do you?
5. Remove the Metal Objects
Metal objects are not good for the health of your networking device as they can interfere with the signals. Taking this into account, you should remove the metal objects if they are kept in the same room where the router is kept or change the location of the router and place it at a location that is not filled with metal objects. Along with this, keep the Orbi device away from transmitting appliances, and metal objects.
Summing Up
Here ends the article talking about how to resolve the Netgear Orbi router setup issues with ease. We hope that the troubleshooting tips mentioned above help you to install or configure your networking device with ease. Although you will be able to do so, in case you are not able to, then reset the networking device. To learn how to reset Orbi router you should refer to the instructions given in the manual.
Do you have anything else to share with your fellow readers about this post? Yes? Well then, do so by making use of the comment section.
